Whenever you are purchasing anything, it is always wise to research a lot about options. This is the same with winches and their accessories. In this article, we shall look into the best jeep bumper for towing.
In choosing a jeep winch bumper we suggest that, you consider a lot of different factors and these includes the following
- if your jeep winch bumper is of high quality
- Is it reasonably priced and within budget
- is it easy to install, etc.
Best Jeep Bumper for Towing
E-Autogrilles 51-0328 EAG 07-18 Front Bumper With Winch Mounting Plate
This jeep bumper is the perfect one which you could mount your winch on. It could handle up to 12000 lbs weight capacity. It could fit 2007 to 2018 Jeep Wrangle JK and it is very easy to install. What is more amazing about this jeep bumper is that it does not cost too much.
The E-Autogrilles 51-0328 EAG 07-18 comes with impressive and handy features such as:
- Shackle mounts from inside and outside for maximum strength
- 3/4″ diameter, 7/8″ diameter pin D rings
- Could support 9500 lbs
- D- rings isolator
This jeep bumper has fog light holes which means you will no longer have to worry about getting fog lights. The bumper is coated with textured powder which makes it rust-free. It is also corrosion free. Keep in mind when it comes to this jeep bumper is that it does not fit 2017 JK Rubicon Recon. Moreover, you will have to drill holes and use self- tapping screws to mount a front license plate. If you are looking for a sturdy front jeep bumper that is very sturdy and has the ability to support your winch, then, this one is highly recommended and is perfect for fit for you.
Smittybilt (76807) XRC Gen 2 Front Bumper
This front bumper comes with huge approach angle. It could handle a winch that has weight capacity of 12000 lbs. If you have a Jeep Wrangler JK 2007- 2018, then, this jeep front bumper is perfect for you.
With the big approach angle of this front bumper, you would have an increased clearance in extreme conditions which makes it perfect and possible to be used during your off-roading adventures such as rock crawling.
Moreover, this front bumper includes D-ring and jack point mount. It also has a fender to fender protection which ensures that you will no longer have to worry about pebbles damaging your winch and vehicle during rock crawling.
Installing this jeep bumper is easy to do. However, you might need someone to assist you in setting it up.
Tip:
- Put the fairlead on the bumper firs
- Then on the fog light enclosure
- Then put your winch on it
Though we cannot vouch of this bumper being rust-free, there are some people saying that even within 4 years they have not even seen a single rust taking place.
The only downside about this jeep winch bumper is that when you install it, you will not be able to have a dedicated place for your license plate. Though that is the case, you could use zip ties and tape to attach your license plate.
Restyling Factory – Black Textured Front Bumper
This one could be used on all models of 2007 to 2018 Jeep Wrangler JK. It is also compatible and it supports winch mounting. It could also accommodate winches that has weight capacity up to 12000 lbs.
This jeep bumper would definitely give value to your money. It is made of high-quality materials and it is very aesthetically pleasing with its aggressive look. Moreover, this jeep bumper comes with impressive features and parts such as its D-ring mounts and fog light holes.
It is very easy to install. However, it could take you about 3 to 4 hours to set up everything. Its instruction manual is very easy to understand as well.
Razer Rock Crawler Front Bumper
If you are looking for a very sturdy front bumper, this one is another perfect option. It could handle a winch that comes with a weight capacity of 12000 lbs. It is also compatible with any Jeep Wrangler JK 2007 to 2018 model. Install this one is very easy to do. In fact, you will not have to drill any holes on your jeep nor on your bumper and it would not even take you more than an hour to do this.
This front bumper also has two fog light holes, D-ring mount and two 4.75 ton D- rings. Though this one is not made with too high quality materials, it is still an impressive option.
Havoc Offroad GEN 2 Wrecking Ball Mid Width Front Bumper
This mid-width front bumper could handle winches that come with weight capacity up to 12000 lbs and 10×4.5″ bolt patterns. It comes with great and impressive features such as having heavy-duty D-rings and fog light holes. It also has a D-ring isolator and fog light extension.
This front bumper is easy to install with its easy to understand instruction manual. You will not have to take too much time in installing the bumper. In fact, approximately, it would only take you about an hour and a half to install this one.
Conclusion
We hope that through this article, you are able to get useful information which could help you in choosing the best bumpers that would suit your winch, jeep and your preference.